Crane Dragging

The Crane dragging is very difficult and responsible work. Below you can see the rules!

The valves must be observed:

- Rules for design and safe operation of cranes;

- Regulations for Electrical.

We can not work on the faulty and not having to tap fencing. Do not repair it by yourself.

Securely fasten the load.

Shipping weight and dimensions must comply with passport data tap.

Work site for lifting and moving of goods should be while working well lit. When lighting is poor jobs, heavy snowfall, fog, as well as other cases where a person serving hoist bad distinguishes signals slinger or movable goods, work hoists should be discontinued.

Feed voltage on a lifting device from the external power supply must be carried out using the input device having a manual or remote control for stress relief.

Cargo hooks in cargo over 3t. must be made on the rotating ball bearings closed except for a special purpose hooks. Cargo hooks throat which may fall when working removable lifting devices must be equipped with a safety lock.

Lifting a load that is not designed slinging schemes should be carried out in the presence and under the supervision of the person responsible for the safe conduct of work cranes.

Loads, Suspended to hook lifting device must be securely tied with ropes to move during their fall excluded parts (boards, wood, pipes, etc.) and provide a stable position when moving cargo. Strapping long loads should be performed double sling, and in the case of vertical ascent - lanyard with safety clip.

In the area of movement of goods all openings must be closed or fenced and posted warning signs security.

Loads during its movement in the horizontal direction must be first raised to 0.5 meters above and more objects encountered on the way.

Goods are allowed to omit the prepared place where excluded them from falling. For the convenience of extracting slings in place to stop it is necessary to lay solid gaskets.

Omit loads on floors, pillars and platforms without calculating structural strength and overload them over the allowable loads prohibited.

Leave cargo in limbo, as well as lift and move people hoisting machines, not intended for lifting prohibited. In case of failure mechanism while crane dragging: when you can not lower the load, place under a suspended load must be fenced and posted placards saying "Danger Zone", "The passage is closed."

More information can be found on the site of the producer!

This article been written by Dreamview that provides white hat seo services.

This entry passed through the Full-Text RSS service — if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.