Crane Weigher

Cranes dispensers or as save water.

Times when everything cost a dime and about saving water, few people thought, had long since passed. Increasingly, customers have sounds one question - how you can start saving water in the enterprise and at the same time not much to spend? One answer - to set the self-closing taps dispensers.

The main difference between these devices from ordinary faucets and mixers is that the user need not worry about closing the tap after use - a specially designed cartridge automatically cutting off the tap water dispenser itself after a certain period of time. Savings there. Where before the fault of the person who had forgotten after washing your hands cut off the water, the water can flow clock will now be a full order - take care of this faucet spout.

Also significant water savings can not forget about the hygienic aspect. After handwashing user public spaces do not need to touch again, to put it mildly, non-sterile parts of the valve body to turn off the water and, consequently, the risk of catching some "disease of dirty hands" is virtually zero. And this is another significant advantage in favor of dispensing valves.

By purpose self-closing valves are divided into the following categories:

1. Cranes weigher for sinks (wash basins).

2. Cranes weigher for shower.

3. Cranes weigher for urinals;

4. Cranes weigher for toilet (the toilet bowl or genoa).

This article is a brief description of the first two categories of self-closing devices.

Some general technical aspects of cranes dispensers for the sink and shower.

Methods for preparation of water temperature for devices with a single pipe water supply system. If the hot water boiler is used in the enterprise, for the use of such cranes dispensers enough to install on a boiler water temperature of 40 degrees Celsius and further diluted by the taps one pipe with hot water from the boiler.

If an enterprise centralized supply of hot water for the temperature that water treatment is best to use a special thermostatic valve. Setting the desired temperature, you can not worry more, the water delivery point will come a predetermined temperature. In addition about crane weigher, most of the current models have thermostatic valves so-called protection from burns - if the water supply is lost cold water then hot water flow is automatically shut off.

Another point concerning the pressure in the water supply system.

Before finalizing your specific model tap dispenser you must measure the supply pressure, as each model has a self-closing tap technical parameter as the minimum operating pressure. The main requirement - for trouble-free operation, the water pressure in the system should be slightly higher than the minimum operating pressure specified in the technical parameters of the selected model-tap dispenser.

This article been written by Dreamview that provides white hat seo services.

This entry passed through the Full-Text RSS service — if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.